Chengdu Wanggan Technology Co., Ltd.
Chengdu Wanggan Technology Co., Ltd.
Add to Cart
GPS Land Slope Distance Fixed Point Length And Width Area Measurement GNSS GPS Survey Equipment
Round-trip Machine Load Of GNSS GPS Survey Equipment:
Round-trip machine load is used to measure the area of agricultural machinery back and forth work,put the Land meter in the middle of the vehicle width as far as possible,set the width of the front-end operation of agricultural machinery,and then carry out back and forth work measurement.
① At the Round-trip machine load in parameter setting,press the ▲▼button to set the width.
② After setting is completed,press the "Stop" to return main interface.
③ Press the▲▼button switch function to“Round-trip machine load”in the main interface；
④ Press【Start】button at the starting point to start the measurement at the beginning of the work.
⑤ Press the【Stop】button to pause measurement and view data after agricultural machinery work is completed；If the measurement is not completed,press the 【Start】 button again to continue the measurement. If the measurement is completed,press "Stop" to save the data.
Product Features Of GNSS GPS Survey Equipment:
| Multipoint distance measurement | √ |
| Slope distance measurement | √ |
| Altitude display | √ |
| Altitude measurement | √ |
| Track display | √ |
| Real-time track | √ |
| Mu setting | √ |
| Unit setting | √ |
| Time display | √ |
| Data statistics | √ |
| Historical record | √ |
| Data export | √ |
| Car charger | √ |
| Lighting /Currency detection | √ |
| Voice broadcast | √ |
| Protection level | IP66 |
| |
| |