Chengdu Wanggan Technology Co., Ltd.
Chengdu Wanggan Technology Co., Ltd.
Add to Cart
GPS All Type Terrain Measuring Tool GPS Land Measuring Instrument
Power On,Power Off Of GPS Land Measuring Instrument:
1. Power on:
With the equipment off,hold the "Stop" button until the screen lights up(about 2 sec)and the boot interface appears,then it’s successful to turn on the device.
2. Power off:
① After booting,press the "Stop" button for 2 seconds .
② When the shutdown page appears,press the 【Enter】 button to confirm the shutdown.
Note:
① When the instrument is in non-measurable state, if the instrument is not operated, the instrument will automatically shut down after 1 hour.
② When the battery power is lower than 5 %, it will give the prompt and turn off automatically.
Unit Setting Of GPS Land Measuring Instrument:
① On the home page of boot,press the 【Settings】button to enter the settings interface；
② Press the▲▼button move to“unit setting”；
③ Press the【Enter】button to enter；
④ Press ▲▼ button to choose the unit you want.
⑤ After finishing setting,press the "Stop" button to exit.
Note:After setting, the measurement interface data is displayed as the set unit, and the units displayed in the data records are all set units.
| Functions | S4 |
| Positioning accuracy | 2.5m |
| Initial barometric calibration | √ |
| Normal area measurement | √ |
| Mountain area measurement | √ |
| Intell. Slope measurement | √ |
| Fixed point measurement | √ |
| Fixed width area measurement | √ |
| Normal distance measurement | √ |
| Manual distance measurement | √ |
| Altitude display | √ |
| Altitude measurement | √ |
| Track display | √ |
| Mu setting | √ |
| Unit setting | √ |
| Time display | √ |
| Data statistics | √ |
| Historical record | √ |
| Lighting /Currency detection | √ |
| Dry battery | √ |
| lithium battery | √ |
| Data storage | 200 |
| Voice broadcast | √ |
| Data export | √ |