Irregular Terrain GPS Measuring Tool

GPS Land Survey Color Screen Irregular Terrain Mountain Slope GPS Measuring Tool

Circle Machine Load Area Measurement Of GPS Measuring Tool:

Circle machine load measurement function is used to measure area around the land, set the position of the land meter in the vehicle and the nearest distance of the ground boundary,and then measure the boundary around the region.Then measuring around the boundary of the land.

① At the Circle machine load in parameter setting,press the ▲▼button to set the edge distance;

② After setting is completed,press the "Stop" to return main interface;

③ Press the▲▼button switch function to “Circle machine load”in the main interface;

④ In the main interface,press the【Start】button to measure at starting point .

⑤ Press the【Stop】button to pause measurement and view data after agricultural machinery work is completed；If the measurement is not completed,press the 【Start】 button again to continue the measurement. If the measurement is completed,press "Stop" to save the data.

Round-trip Machine Load Of GPS Measuring Tool:

Round-trip machine load is used to measure the area of agricultural machinery back and forth work,put the Land meter in the middle of the vehicle width as far as possible,set the width of the front-end operation of agricultural machinery,and then carry out back and forth work measurement.

① At the Round-trip machine load in parameter setting,press the ▲▼button to set the width.

② After setting is completed,press the "Stop" to return main interface.

③ Press the▲▼button switch function to“Round-trip machine load”in the main interface；

④ Press【Start】button at the starting point to start the measurement at the beginning of the work.

⑤ Press the【Stop】button to pause measurement and view data after agricultural machinery work is completed；If the measurement is not completed,press the 【Start】 button again to continue the measurement. If the measurement is completed,press "Stop" to save the data.

Note: clicking "data" here will not display real-time data, and the current measured area must be calculated by clicking "pause".