Mountain Slope Gps Surveying Tools LCD Display GPS Land Measuring Tools

GPS Survey Equipment Mountain And Slope Measurement High Accuracy Land GPS Measuring Tool

Altitude choose of GPS measuring tool:

① On the home page of boot,press the 【Settings】button to enter the settings interface；

② Press the▲▼button move to“System setting”；Press the【Enter】button to enter；

③ Press the【Enter】button to the altitude;

④ Press ▲▼ button to choose GPS or barometer;

⑤ After finishing setting,press thebutton to exit.

Note: if you choose the barometer, you need to calibrate the height. The measurement is more accurate after calibration.

• Altitude calibration(just for S4)

① On the home page of boot,press the 【Settings】button to enter the settings interface；

② Press the▲▼button move to“Altitude calibration”；Press the【Enter】button to enter；

③ Press ▲▼ button to adjust the value of number；

④ After finishing setting,press thebutton to exit.

• Data record

• Statistics record

① On the home page of boot,press the 【Settings】button to enter the settings interface；②Press the▲▼button move to“Data record”；Press the【Enter】button to enter；

③ Press ▲▼ button to “Statistics record”,then press the【Enter】button to enter；

④ Press ▲▼ to choose area or distance in the data record interface;

⑤ Press 【Enter】button can delete the data.

• Measuring record

① On the home page of boot,press the 【Settings】button to enter the settings interface；

② Press the▲▼button move to“Data record”；Press the【Enter】button to enter；

③ Press ▲▼ button to “Measuring record”,then press the【Enter】button to enter；

④ Press ▲▼ to select a record in the measuring record interface;

⑤ Press the【Enter】button to view detailed data information;

⑥ Press the 【Settings】button can view the graphic display.(Press 【Enter】button can delete the data.)

• Factory reset

① On the home page of boot,press the【Settings】button to enter the settings interface；

② Press the▲▼button move to“Factory reset”；Press【Enter】to factory reset interface;

③ Press the▲▼button to select "Yes" ;

④ Press【Enter】to restore the factory settings.

Note: restore the factory settings will clear all measuring data and parameter setting.