
Add to Cart
High sensitivity GNSS receiver chip could make sure that the measurement data is reliable and high accuracy. Passive large-size planar antenna could recieve GPS,BDS,GLONASS, GALILEO and SBAS signals.
This equipment could be used in Agriculture work, if you want to the area of your farmland or lake, this land meter could help a lot.
And the measuring method is easy, just walk along the edge of the area you want to measure or walk through the road where you want to measure the distance. With the equipment on your hand, you will know the results.
Normal area measurement
.At the starting point,press the [start] button to measurement in the main interface.
. Return to the starting point in a circle around the ground,press the [stop] button to pause themeasurement and view the measurement data.
. Press the button to end measurement and save data.
Normal distance measurement
In the main interface,press the [Start] button for 3 sec to measurement at the starting point.
. Walk along the measuring line to the end point and press the [Stop] button to stop the measurement and view the measurement data.
. If the measurement is not completed,press the [Start] button again to continue the measurement. If the measurement is completed, press to save the data.
Matters need attention:
①Check whether the machine can be started up normally.
②This product powered by lithium batteries,do not put it under the sun exposure. For other lithium battery transportation and safety,please refer to relevant national regulations.
③When this product is not used for a long time,please take out the battery.
④Please turn on the product and use it in open area,the effect is the best.
⑤Affected by GPS signal,different regions receive different GPS signals,the measurement results will be inconsistent,this is normal condition,please feel free to use it.
⑥Please use the original charger to charge the device(Do not use non-conforming charger ).