Digital Handheld GPS Measuring Tool For Forest Land Area Measurement

Handheld GPS Measuring Tool Land Area Digital Measurement Meter Device Measuring Forest Land

Length and width area measurement of handheld GPS measuring tool:

①In the main interface,press the ▲▼to switching function to “Length and width”.

②At the starting point A press the【Start】button to measure,and press the【Enter】button to save the point A,go to the inflection point B, and press the【Enter】button to save the point B,go to the inflection point C,press the【Enter】button to save point C.

③Press the【Stop】button to end measurement and view data,and press "power" to save the data.

Mountain area measurement

①In the main interface,press the ▲▼to switching function to “Mountain”.

②Press the 【Start】button to measure at the top of the mountain,and press the 【Enter】 button to confirm the information.

③Press the【Enter】button and proceed from the foot of the mountain,walk around the foot of the mountain,and back to the starting point, press the【Enter】button,then press the【Stop】button to end measure and view data；

④press "power" botton to save the data.

In the measurement interface,three letters A,B and C will be displayed next to "Mountain" above the screen.

A represents the location information of the mountain top collected.

B represents the starting point at the foot of the mountain.

C represents to go around the foot of the mountain from the starting point and then back to the starting point.

Fixed point area measurement:

①In the main interface,press the ▲▼to switching function to“Fixed point”.

②At the land starting point,press the【Start】button to start measuring,and press the 【Enter】 button to confirm the information of the starting point.

③Walk along the edge of the land,press the 【Enter】button at each inflection point to collect the information of each inflection point；

④After collecting the information of the last inflection point (not coinciding with the starting point),press【Stop】button to pause the measurement and view the data.

⑤If the measurement is not completed,press the【Start】button again to continue the measurement. If the measurement is completed,press "power" to save the data.

Note:

When using the fixed point function,two words of “fixed point ”will be displayed at the measurement interface.

When using the area measurement function,the measurement area icon will be displayed on the left side of the measurement interface.

When using the fixed width function,the words on the right side of the measurement interface represent the number of points collected.

Operation instructions of Distance measurement:

Normal distance measurement function

①In the main interface,press the【Start】button for 3 sec to measurement at the starting point.

②Walk along the measuring line to the end point and press the 【Stop】button to stop the measurement and view the measurement data；

③ If the measurement is not completed,press the【Start】button again to continue the measurement. If the measurement is completed,press "power" to save the data.

Voice,Currency detection lamp and flashlight

Opening and closing of voice

Long press the【Settings】button to open or close the voice at any interface.

Voice opening state:

Voice closing state:

Opening and closing of currency detection lamp and flashlight

Flashlight and currency detection lamp need to be in the main interface of the Land meter,

Long press the【▲】button to open or close the flashlight.

Long press the【▼】button to open or close the currency detection lamp.