GNSS GPS Land Area Distance Measuring Tools GPS Land Measuring Instrument

GNSS GPS Land Area Distance Measuring Tools GPS Land Measuring Instrument

Measurement preparation Of GPS Land Meter:

The first step:

In an open area outside ,press the "Start" button for 2 seconds to enter into the home surface of the land meter;

The second step:

Search satellite after start up,there will be voice prompt,the text on the screen indicates the status of the signal and the value of

HDOP. It is recommended that the HDOP value below 1.0 start measuring.

The third step:

After the HDOP value is below 1.0 ,press the▲▼button to choose measurement function,and start to measure according to the

demand.At last,press the【Start/Stop】button to the measurement surface.

Normal area measurement,L/W area measurement

Using range:all flat terrain:

1. At the starting point(Start at any point),press the【Start/Stop】button to measure in the main surface;

2. Return to the starting point in a circle around the ground,press the【stop】 button to pause the measurement and view the

measurement data.

3. Press the "Start" button to end measurement and save data.

Using range:The measured terrain should be a regular rectangle

① At the starting point A,press the【Start/Stop】button to measure,and press the【Enter】button to save point A information;

② Going from point A to point B,press the【Enter】button to save point B information ;Then going from point B to point C,press

the【Enter】button to save point C information ;At last,press the【Start/Stop】button to view the measurement data;

③ Press the "Start" button to end measurement and save data.

Normal distance measurement

Using range:all flat terrain

① At the starting point(Start at any point),press the【Start/Stop】button for 3 seconds to measure in the main surface;Press

the【Start/Stop】button at the ending point and end the measurement to view the measurement data;

② Press the "Start" button to end measurement and save data.

Setting Methods Of GPS Land Meter:

1. unit setting:

Press the up and down button to adjust the requirement value, set number and unit, press [enter] button to the next step. Press "power" button to

save data.

2. System setting:

Press the up and down button to adjust the requirement value, set number and unit., press [enter] button to the next step.

3. Data record:

(1) Data statistics:

Press [enter] button to delete and press "power" button to return.

(2) Measuring record:

Press the [Setting] button to view graphic,[enter] button to delete and press the up and down button to move, press "power" button to return.

4. Time zone choose:

Choose the time zone of your area and press the [Enter] button to select.

5. Factory reset:

Restore the factory setting, Yes or No? The [Enter] button is Yes and press "power" button is No.