Mountain Terrain GPS Land Measuring Instrument Land Survey Gps Devices

GPS Land Measuring Instrument Agriculture Land Meter Measurement GPS Land Meter

Round-trip machine load of GPS land measuring instrument:

Round-trip machine load is used to measure the area of agricultural machinery back and forth work,put the Land meter in the middle of the vehicle width as far as possible,set the width of the front-end operation of agricultural machinery,and then carry out back and forth work measurement.

① At the Round-trip machine load in parameter setting,press the ▲▼button to set the width.

② After setting is completed,press the "Start" to return main interface.

③ Press the▲▼button switch function to“Round-trip machine load”in the main interface；

④ Press【Start】button at the starting point to start the measurement at the beginning of the work.

⑤ Press the【Stop】button to pause measurement and view data after agricultural machinery work is completed；If the measurement is not completed,press the 【Start】 button again to continue the measurement. If the measurement is completed,press "Start" to save the data.

Circle machine load measurement function is used to measure area around the land, set the position of the land meter in the vehicle and the nearest distance of the ground boundary,and then measure the boundary around the region.Then measuring around the boundary of the land.

① At the Circle machine load in parameter setting,press the ▲▼button to set the edge distance.

② After setting is completed,press the "Start" to return main interface.

③ Press the▲▼button switch function to “Circle machine load”in the main interface.

④ In the main interface,press the【Start】button to measure at starting point .

⑤ After a circle around the land under test,press the【Stop】button to end measurement and view data,press “Start“ to save data.

Intelligent slope function

The Intelligent slope function can automatically obtain the gradient information of the location and more accurately measure the area of the slope.

① In the main interface,press the ▲▼to switching function to “Intelligent slope”

② Press the【Start】button at the staring point and circle the slope.

③ Back to the starting point,press the【Stop】button to pause measurement and view data.

④ If the measurement is not completed,press the【Start】 button again to continue the measurement. If the measurement is completed,press "Start" to save the data.

Slope measurement

This function is used for users to know the precise gradient of the measuring area, input the gradient value before the measurement,and carry out the measurement.

① At the Slope in parameter setting, press the ▲▼button to set the gradient.

② After setting is completed,press the "Start" to return main interface.

③ In the main interface,press the ▲▼to switching function to “Slope measurement”.

④ Press the【Start】button at the staring point and circle the slope.

⑤ Back to the starting point, press the【Stop】button to pause measurement and view data.

If the measurement is not completed,press the【Start】button again to continue the measurement. If the measurement is completed,press "Start" to save the data.